آرشیو مقالات

Glass railing/balustrade – bracket/buried system

Bracket/Buried Railing System

A bracket/buried railing system is a type of glass railing where the fittings and profiles are installed hidden inside the floor or wall, leaving only the glass visible. This type of railing is used for balconies, terraces and staircases due to its modern and integrated appearance.

Advantages
  • Unique beauty and transparency: A completely modern and minimalist frameless appearance that creates an open and unobstructed view.
  • Minimal visual intervention: Hidden connections and retaining structure and focusing on the glass and the view behind it.
  • High strength: High-quality aluminum profiles provide adequate strength to hold the glass.
  • No need to drill holes in the glass: Reduces costs and complexity of production and reduces the possibility of glass breakage.
  • Easy to clean: The smooth surface and seamless channel make cleaning easy.

Disadvantages
  • High cost: Implementing the channel in the floor and using quality profiles costs more.
  • Complexity of implementation: Requires high precision in the foundation and installation of the channel; errors in the level or depth of the channel affect the entire project.
  • Limited repairability: Repairing or replacing the channel in case of a problem is difficult and costly.
  • Sealing and drainage: Proper management of sealing and drainage is essential to prevent rust or other problems.
  • Limitations in changes: After the channel is implemented, it is not possible to change its location or dimensions.
The buried railing system is a luxurious and modern choice for projects that seek the ultimate in beauty, transparency, and elegance in the design of glass railings.
Glass railing/balustrade – Bracket system/Exposed jaw

Exposed Bracket Railing System

Exposed Bracket Railing System or Exposed Glass Railing is a type of glass railing where the glass support brackets (brackets or jaws) are installed in an exposed and visible manner on the surface. This system usually consists of aluminum profiles and glass support fittings that are placed either integrally or at specific intervals on the ground or floor.


Advantages

  • Quick and easy installation: No drilling of the glass is required, and the installation of the clamps on the surface is usually quick.
  • Modern and industrial appearance: Visible metal clamps create a modern and sometimes industrial appearance.
  • Flexibility in glass dimensions: Possibility of using different glass without precise drilling.
  • Easy maintenance and maintenance: Replacing the clamp or glass is easy.
  • More affordable: Usually less expensive than fixed point (spider) systems.



Disadvantages

  • Visibility of connections: Metal clamps are visible and do not have the elegance of Fixpoint or Spigot systems.
  • Possibility of glass damage: Excessive pressure or poor quality of clamps can damage the edge of the glass.
  • Limitations in complex designs: Curves or special designs are more difficult to implement.
  • Need for careful alignment of clamps: Alignment is important to prevent the glass from tilting.

The Exposed Bracket Railing System is a practical and economical option for projects that are looking for a modern, easy-to-install glass railing, and for which the visibility of the connecting parts is not a priority.


Glass railing/balustrade -Fix Point System

Fix Point System

The Fix Point railing system is a type of glass railing system in which the glass is connected to the structure by point connections. These connections are usually made of stainless steel and are connected to the wall or floor with metal buttons or pins.

Advantages
  • Stunning transparency and beauty: The highest level of transparency and the least visual interference due to point and delicate connections.
  • Design flexibility: Possibility of implementing curved or complex geometric railings and facades.
  • Relatively lightweight: Less weight than traditional framed systems.
  • Unobstructed view: Providing a completely open and unobstructed view in the railing system.

Disadvantages
  • High cost: Using quality fittings and requiring Precise drilling in glass.
  • Complexity of calculations and execution: Precise design of the hole locations requires high engineering skills.
  • Requirement of glass with holes: Limitation in the choice of glass types and sensitivity in drilling.
  • Sealing challenges: Managing the sealing at the connection points of the fittings to the glass and the structure requires high precision.
  • Repair and maintenance: Replacing the glass or fittings can be more complicated than some other systems.
The Fix Point system is most often used in projects where the main priority is beauty, transparency and a modern and luxurious atmosphere. For railings, this system is very common because it offers a completely open and unobstructed appearance.
Glass railing/balustrade – Spigot system

Spigot Railing System

The Spigot Railing System is a type of modern glass railing that consists of metal bases called spigots and tempered glass. Due to its minimalist design and high transparency, this system is used in various spaces such as balconies, terraces, swimming pools and stairs, and in addition to increasing safety, it also improves the visual beauty of the space.




Advantages

  • Modern and minimal appearance: Clean, transparent and modern appearance that does not block the view.
  • Relatively easy installation: Installing spigots is easier and faster than spider or fin glass systems.
  • Affordable cost: Lower cost than spider or fin glass systems.
  • High strength: With stainless steel and laminated safety glass, strong and safe railings.
  • Flexibility in design: Possibility of implementation Straight, curved and angular lines.
  • Easy maintenance: Steel parts are easy to clean and resistant to rust.




Disadvantages

  • Need for precise drilling: Installing spigots requires high precision in drilling and measuring.
  • Surface coverage: Spigots occupy part of the surface, which may not be desirable for some.
  • Limitations in the capless design: If a cap is not used on top, the edge of the glass is visible.
  • Possibility of glass breakage in direct impact: In the event of a severe impact, there is a possibility of the edge of the glass breaking (laminated glass prevents it from falling).

The Spigot railing system is a great solution To create safe, beautiful and modern glass railings at a more affordable cost than other frameless systems.



Lamella Curtain Wall Glass Facade – Metal Structure System


Metal Structure System


The metal structure system is one of the most modern methods of implementing a glass facade, which uses spider metal connections to connect the glass to the main structure, creating a modern, transparent and integrated facade.



Advantages


  • Very high strength and resistance to structural loads
  • Possibility of implementing large openings without additional columns
  • Ability to use a variety of coatings such as glass, stone, composite and ceramic
  • Suitable implementation speed
  • High flexibility in architectural design
  • Cost-effective compared to many modern facade systems




Disadvantages


  • Possibility of corrosion if not properly protected
  • Heat transfer in the event of Lack of proper insulation
  • Heavier weight than some modern systems
  • Need for specialized and precise execution
  • Need for a principled design to control expansion and contraction


The metal structure system is considered one of the best options for implementing the facade of modern office, commercial and residential buildings due to its high strength, modern appearance and design flexibility.




Lamella Curtain Wall Glass Facade – Fin Glass System


Finglass System

Finglass system is one of the most advanced types of glass facades that creates a completely transparent, modern and luxurious facade using structural glass fins and spider connections.





In this system, vertical glass fins act as structural elements and, in addition to bearing the load, increase the strength and integrity of the facade. This technology allows for the implementation of all-glass facades without the need for metal frames.






Advantages


  • Very high transparency and beauty
  • Modern and luxurious appearance
  • Reduced use of metal structure
  • High resistance to corrosion
  • Powerful structural performance
  • High safety using laminated glass






Disadvantages


  • High implementation cost
  • Requires precise engineering design
  • Installation Specialized and Sensitive
  • Challenges in Sealing
  • High Maintenance and Repair Costs


The Fine Glass system is one of the most luxurious and modern methods of implementing glass facades, providing the highest level of transparency and beauty for specific projects.




Glass facade lamella curtain wall – cable system

Cable Spider System

A cable spider system is a type of glass facade in which the glass is connected to the main structure using steel cables. This system is very popular in modern buildings due to its beauty, transparency, and the ability to create curved and smooth facades.

Advantages
  • Very light, transparent, and modern appearance: Creating maximum transparency and a sense of lightness of the glass
  • Minimal visual intervention: Spider and cable connections, minimal and eye-catching appearance
  • High flexibility in design: Possibility of implementing curved glass surfaces and glass ceilings
  • Capability of transferring loads over long distances: Bearing the load of the glass in large openings without intermediate frames
  • Unique aesthetics: Gives the building a special and artistic appearance

Disadvantages
  • Design and computational complexity: Requires precise engineering calculations and mastery of cable behavior
  • High cost: Special spider fittings and steel cables, along with specialized design
  • Requires periodic maintenance and inspection: Tension cables must be inspected regularly
  • Difficulty in repair and replacement: Replacing the panel or repairing the spider connection is time-consuming
  • Sensitivity to execution error: High precision in installing and adjusting the tension of the cables is crucial
  • Limitations in sealing: Creating a complete seal at the spider connection location is challenging
The cable spider system is mostly used for special architectural projects, luxury spaces, entrances, glass ceilings, and facades with maximum transparency and visual beauty.
Glass facade lamella curtain wall – Unitize system


Unitized Curtain Wall

Unitized Curtain Wall is an advanced method of curtain wall construction in which all the fabrication and assembly of the facade components, including glass, profiles, and fittings, is carried out in the factory. These complete units are then transported to the project site and installed as a single unit. This method has significant advantages over traditional methods due to the prefabricated parts, high speed of execution, better quality and reduced installation costs on site.




Advantages

  • Very high and controlled quality: Production in the factory leads to higher quality and better performance than facades installed on site.
  • Extremely high speed of execution on the project site: Faster installation due to the prefabricated units.
  • Reduced dependence on weather conditions: Most of the production and assembly steps are carried out in the factory.
  • Better safety during execution: Reducing assembly work at height increases the safety of workers.
  • High precision and elegance: Very low tolerances and precise and beautiful facade.
  • Efficiency Better thermal and acoustic: Possibility of using quality insulation in the factory.




Disadvantages

  • High initial cost: Requires more investment in prefabricated production and factory equipment.
  • Need to transport and move large and heavy units: Careful planning for cranes and transportation is required.
  • Difficulty in on-site modifications: Errors or changes in unit dimensions are difficult to correct.
  • Need for careful planning and coordination: Coordination between the design team, factory and installation is essential.

The Unitize system is an ideal option for large projects, high-rise towers and buildings that are They are looking for high quality views and fast execution.



Glass facade lamella curtain wall – frameless system


Frameless System

Frameless curtain wall system is one of the most modern and luxurious types of glass facades in which there is no visible frame on the exterior facade and a completely integrated and transparent surface is created.





In this system, the glass is attached to the structure using silicone or polyurethane adhesives and all joints are hidden from the exterior facade. This feature creates a modern, minimal and very beautiful look.






Advantages


  • Creating a completely integrated and luxurious facade
  • Maximum natural light entering the building
  • Wide and unobstructed view
  • High resistance to environmental conditions
  • Light weight and reduced structural load
  • Possibility of designing special architectural forms






Disadvantages


  • High implementation cost
  • Complete dependence on quality Execution
  • Specialized and complex repairs
  • Requires professional execution force
  • Requires meticulous maintenance


Frameless facade is one of the most advanced glass facade systems that provides the highest level of beauty, modernity and quality for special buildings.